ZVS for Tesla Coil Driver Board, for Tesla Coil Flyback Driver Marx Generator w/Jacob’ladder Ignition Coil 12-36V

ZVS for Tesla Coil Driver Board, for Tesla Coil Flyback Driver Marx Generator w/Jacob

    Features:

  • 【Parameters】12V-36VDC input (24V recommended), can reach 12V input power of 50V-100W, the maximum 24V input can reach 200W or more, and the power supply current is preferably greater than 10A.
  • 【Features】Flyback drive circuits, like zero voltage switching, are used to drive the ignition coil. A large number of fans call them “ZVS circuits”.
  • 【Wide application】The ZVS for Tesla coil flyback drive circuit is widely used in Spark Gap for Tesla unit (SGTC) and Jacob, stairs, generators, Marx, etc.
  • 【High-voltage direct current output】 ZVS flyback driver has large power, the heat is low, the fan is simple and reliable, and the voltage input voltage is about 1000 times.
  • 【After-sales service】We are committed to providing the best products and best services. If you have any questions about our products, please contact us by email. Our professional customer service team will reply and solve your problems in time!

Marx Generator,Jacob’ladder Ignition Coil,ZVS Tesla Coil Flyback Driver,12-36V Input,for Sgtc Marx Generator Jacob&39;s Ladder 12-36V

Marx Generator,Jacob

    Features:

  • ★★★★★【Advantage】A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them “ZVS circuit”.
  • ★★★★★【Application Range】Widely used in the drive spark gap tesla coil (SGTC) and Jacob, ladders, Marx generator, etc.
  • ★★★★★【Important Parameters】12-36VDC input (recommend 24V), output high voltage direct current, voltage of the input voltage of about 1000 times. The 12V input can reach 50-100W power, 24 V input max can reach more than 200W, so request power supply current best in more than 10A.
  • ★★★★★【Package List】1 x ZVS Tesla coil driver board;1 x ignition coil
  • ★★★★★【Quality Service】If you have any technical questions,please contact us and we will give you a detailed answer as soon as possible.

ZVS 20A 1000W DC12-30V Low Voltage Induction Heating Module Flyback Heater Driver Board

ZVS 20A 1000W DC12-30V Low Voltage Induction Heating Module Flyback Heater Driver Board

    Features:

  • 💝ZVS 20A 1000W Low Voltage Induction Heating Module
  • 💝Flyback Heater Driver Board
  • 💝24V input with no load current of 3A
  • 💝zero voltage switching (ZVS) tesla coil flyback driver board with high power output up to 300W, support DC12-30V input and current should be over 10A, igh voltage output ideal for DIY spark gap tesla coil (SGTC), Jacobs ladder and Marx generator, etc.
  • 💝Large inductor of stable performance parameter, 30mm big magnet ring, 1.2mm pure copper wire; the bottom of circuit board high current part is soldered, all resistor adopt five ring tight resistor

12V-48V 2500W High Frequency Induction Heater, Zero Voltage Switching ZVS Induction Heating Board Module Flyback Driver Heater with Tesla Coli

12V-48V 2500W High Frequency Induction Heater, Zero Voltage Switching ZVS Induction Heating Board Module Flyback Driver Heater with Tesla Coli

    Features:

  • 🔧【Good Heat Dissipation Effect】This product uses large radiator and large power supply, ensures better heat dissipation effect.
  • 🔧【Induction Heater】The heating plate is made of grade PCB, it has stable performance. The induction heating circuit adopt 12-48V DC power supply, maximum current is 50A, the power uo to 2500W.
  • 🔧【Application】It can be used for DIY players to do quenching, annealing and other heat treatment for small parts. It can also be used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. It can heat evenly and quickly, which is very convenient.
  • 🔧【ZVS Induction Heating PCB Board】The power line is fully covered with copper cover, which can increase the current and heat generation. The output terminal uses three M4 copper columns in parallel, which can be connected to other outputs such as high-voltage packet. Using 6 IRFP260s and 12 parallel resonant capacitors, high power, high efficiency.
  • 🔧【Warm Tips】It is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 50A current. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.

Treedix ZVS Zero Voltage Switching Tesla Coil Flyback Driver Compatible with SGTC, Jacobs Ladder, Marx Generator, Induction Heating

Treedix ZVS Zero Voltage Switching Tesla Coil Flyback Driver Compatible with SGTC, Jacobs Ladder, Marx Generator, Induction Heating

    Features:

  • High power, low heat, simple and reliable.
  • Driver circuit is robust and cleanly built.
  • Secured coil to the core and leads to each other firmly by zip ties. Leads from the primary were sufficiently tinned.
  • Widely used to drive spark gap Tesla coil (SGTC) and Jacobs ladder, Marx generator, induction heating and other devices.
  • When the input voltage is 12v / 5A, the distance of high voltage discharge arc is about 1-2 cm. The greater the input voltage and current, the longer the discharge arc distance. When the maximum input is 30v / 10A, the longest can reach more than 5 cm. If the arc is too short, check whether the input power is sufficient.

DC 15A-20A ZVS Driver Ignition Tesla Coil Flyback Drive Power Supply Driver Board Induction Heating Power Supply Module Ignition Coil Newest

DC 15A-20A ZVS Driver Ignition Tesla Coil Flyback Drive Power Supply Driver Board Induction Heating Power Supply Module Ignition Coil Newest

    Features:

  • 【PARAMETER】This ZVS drive circuit adopts high-quality components with high reliability and high power. Input 15-20A direct current. The output high voltage direct current, the voltage is about 800 times of the input voltage
  • 【ZERO VOLTAGE SWITCHING】This is the flyback drive circuit, used to drive the high-voltage package, used to drive the ignition coil, because it achieves zero voltage switching, it is referred to as “ZVS”
  • 【WIDELY USED】ZVS Tesla coil flyback drive circuit is widely used to drive spark gap Tesla coil (SGTC) and Jacobian ladder, Marx generator and other devices.The light has seven color flash is beautiful
  • 【STRONG OVERLAOD ABILITY】The bottom is too large current in all open the window to add tin processing, overload ability is strong.It has the characteristics of high power, low heat, simple and reliable
  • 【MATERIAL】The ZVS has upgraded stainless steel using 50A high current terminals on the back of a large current location all over tin.It uses FR4 top double glass fiber board production (board size is 11 cm long, 8 cm wide)

Teyleten Robot 1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY

Teyleten Robot 1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY

    Features:

  • ZVS Low Voltage Induction

Quickbuying 1pcs ZVS Tesla Coil Flyback Driver / SGTC / Marx Generator / Jacob’s ladde 12-30V DC

Quickbuying 1pcs ZVS Tesla Coil Flyback Driver / SGTC / Marx Generator / Jacob

    Features:

  • 1pcs ZVS Tesla coil flyback driver / SGTC / MarX generator / Jacob’s ladde 12-30V DC

As an Amazon Associate I earn from qualifying purchases.

Random products:

ovey
ouji board game