Zeda 100 Complete 80cc/100cc Bicycle Engine Kit – Firestorm Edition 36 Tooth

Zeda 100 Complete 80cc/100cc Bicycle Engine Kit - Firestorm Edition 36 Tooth

    Features:

  • New & Exclusive Limited Supply – High Performance Cylinder Head, Carb, CDI, Crank, Bearings & More
  • Firestorm Zeda100 3+ HP Engine w/ single head/50mm Bore/40mm Stroke/US displacement 78.6cc
  • Increased weight capacity, Low operating temps, Easy starting, Sustained power output across rpms
  • Anti-corrosion coat/Angled LD/Z8C spark plug/SS allen bolts/60% Thicker crank case for bearings
  • 40mm Intake/40mm Round Exhaust/more powerful & reliable crank stroke/Type B piston 89mm Long rod

Zeda 80 Complete 80cc Bicycle Engine Kit – Firestorm Edition (Silver,44 Tooth)

Zeda 80 Complete 80cc Bicycle Engine Kit - Firestorm Edition (Silver,44 Tooth)

    Features:

  • Authentic Zeda 80 2 stroke bicycle motor kit
  • Triple 40 (40mm Stroke, 40mm Intake, 40mm Mount)
  • 44 Tooth Sprocket
  • Upgraded bearings
  • Stuffed crank case

Bicycle Motor Works ZEDA 80 Silver Engine Kit

Bicycle Motor Works ZEDA 80 Silver Engine Kit

    Features:

  • Zeda 80 Silver Engine Kit

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb – Silver – Motorized Bike (36 Tooth)

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

    Features:

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above); or pick up a Dio Upgrade Kit for just $99
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm)

66/80cc 2-Stroke Dual Window Piston #1 for Bicycle Engine Kits- Flying Horse, ZEDA, Grubee, and More

66/80cc 2-Stroke Dual Window Piston #1 for Bicycle Engine Kits- Flying Horse, ZEDA, Grubee, and More

    Features:

  • This 66/80cc 2-Stroke Dual Window Piston is the perfect upgrade for your 2-stroke bicycle engine!
  • The windowed design allows for better lubrication to the wrist pin, allowing a smoother ride.
  • With the dual windowed design, this piston allows you to recapture this intake flow loss and run more efficiently.
  • The windowed design also decreases degradation in bike engine kit parts
  • This piston is 40mm Diameter, 45mm Height. Piston Rings NOT included

Zeda 100 Complete 80cc/100cc Bicycle Engine Kit – Firestorm Edition 44 Tooth

Zeda 100 Complete 80cc/100cc Bicycle Engine Kit - Firestorm Edition 44 Tooth

    Features:

  • Firestorm Zeda100 3+ HP bicycle engines with high performance heads & CDI Yamaha components
  • 50mm Bore/40mm Stroke/US displacement 78.6cc/40mm Intake & Round Exhaust/Type B piston 89mm Long rod
  • Increased weight capacity, Low operating temps, Easy starting, Sustained power output across rpms
  • Pearl anti-corrosion coat w/ Z8C spark plugs & 60% Thicker crank case for bearings
  • Improved magneto/50mm bBore single piece cylinder/High-end Allen bolts & Improved gas cap

Zeda New BT Super Sport Complete 100cc Motorized Bicycle Engine Kit – 44 Tooth – Gas Powered Bike

Zeda New BT Super Sport Complete 100cc Motorized Bicycle Engine Kit - 44 Tooth - Gas Powered Bike

    Features:

  • Improved single piece cylinder head with open transfer ports for cooler operation, more consistent output, and increased longevity
  • Limited edition high end metallic enamel coating protects your engine and looks sleek and clean
  • Large 40mm exhaust port, larger Allen bolts, premium hybrid exhaust gasket
  • 100cc BT engine (78.6cc actual), 3 HP+ – Average Power
  • Increased spark plug angle for more complete combustion

CDHPOWER Super Motor Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

CDHPOWER Super Motor Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

    Features:

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80;Wide front mount; 8mm bolts to front and rear bolts;
  • Better performance cylinder head; 40mm alum intake stud spacing; manual EXCLUDED.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm;
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders;fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen; Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder

Bicycle Motor Kit, 100cc Gas Bike Motor Kit 2L Oil Tank Full Set Upgraded Motorized Bicycle Universal Sprocket 8oz 2 Stroke Petrol Engine Kits 150 Miles/Gallon (44 Tooth)

Bicycle Motor Kit, 100cc Gas Bike Motor Kit 2L Oil Tank Full Set Upgraded Motorized Bicycle Universal Sprocket 8oz 2 Stroke Petrol Engine Kits 150 Miles/Gallon (44 Tooth)

    Features:

  • The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Perfect for upgrading from a regular bike to an electric bike, you can enjoy a faster ride. Suitable for most 26″ /28″bikes.
  • 4 bolts attach the engine to your bike frame and this kit comes are 8mm vs the standard 6mm. That means the mounts are twice as strong and twice as secure. 100% brand new and high quality, Durable.
  • Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air. Great for cold weather starts!
  • 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).
  • Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.

Ford 1965 Mustang V8 Engine Model Kit – Working Model Motor with Collector’s Handbook

Ford 1965 Mustang V8 Engine Model Kit - Working Model Motor with Collector

    Features:

  • 1:3 scale model high performance type-K-code 1965 Ford Mustang V8 engine – 200-part model engine kit – No glue required assembly – this working model car engine is a great example of a classic v8 American muscle car engine from the 60’s
  • Sound module with first gen Ford Mustang V8 engine sound – model engine kit includes detailed instructions – build a classic car model engine – this car model for adults is the perfect educational gift for any car lover or gearhead –
  • Transparent engine model – see through model with moving parts, spinning fan and light up sparkplugs – watch all the parts of this scale model motor move while listening to the original Ford Mustang engine sound recording from an actual firstFirst generation Ford Mustang Engine – See the red LED sparkplugs light up in the running motor model as the crankshaft turns and the fan spins – motor model assembly only takes a couple hours
  • Complete with exclusive collector’s manual with Ford archive material and model history – detailed instructions and Ford Mustang history – all about the first generation Mustang – learn all about this classic American muscle car as you build the working model engine kit

As an Amazon Associate I earn from qualifying purchases.

Random products:

oew2-03-2hc
odb