Zapco ST-4X II 4-Channel 320W RMS Class AB Amplifier

Zapco ST-4X II 4-Channel 320W RMS Class AB Amplifier

    Features:

  • 4-Channel, Full Range, Class A/B | RCA and Speaker Level Inputs | Variable input gain control
  • Variable electronic crossover | Auto-on with Speaker level inputs | Compact chassis | Variable bass boost control
  • Power @ 4Ω: 4 x 50 watts | THD @ Rated Power < 0.5%THD | Power @ 2Ω: 4 x 80 watts | Power Bridged @ 4Ω: 2 x 160W RMS
  • Signal to Noise Ratio > 90dB | THD + Noise < 0.5% | Channel Separation >60dB
  • Frequency Response 15Hz to 30KHz ±1dB | Input Sensitivity .25v to 5v | Dimensions in mm: 160(W) x 52(H) x 260(L) Overall: 160(W) x 52(H) x 302(L)

Zapco ASP-Q1 6 Channel Dash Mount Equalizer

Zapco ASP-Q1 6 Channel Dash Mount Equalizer

    Features:

  • ASP-Q1 – Zapco 6-Channel Analog Signal Processor
  • 5 Bands Parametric Equalization
  • THD+ Noise: ≤ 0.001%
  • Signal to Noise: ≥ 110dB
  • Preamp Output: 9 Volts RMS

Zapco ST-4B 4 Channels Class AB Amplifier, Black

Zapco ST-4B 4 Channels Class AB Amplifier, Black

    Features:

  • 90 watts 4 channel bridgeable amplifier
  • 65W rams x 4 @ 4 ohm, 90W rams x 4 @ 2 ohm, 280W rams x 2 @ 4 ohm bridged
  • 90W max x 4 @ 4 ohm, 135W max x 4 @ 2 ohm, 280W max x 2 @ 4 ohm bridged
  • Low pass filter: 50Hz – 250Hz, dual high pass filters: 80Hz – 3Khz, bass boost: 0-12db switchable
  • High current misfit power supply, high current bi-polar output devices

Zapco DC1100.1 DC Series 1100w RMS Calss A/B Monoblock Amplifier w/ Digital Processing

Zapco DC1100.1 DC Series 1100w RMS Calss A/B Monoblock Amplifier w/ Digital Processing

    Features:

  • Stereo, 4 ohms: 1 x 820 Watts
  • Stereo, 2 ohms: 1 x 1100 Watts
  • T.H.D. + Noise: <0.015% @ 4 ohms
  • 18ft din cable included

ASP-OE2 – Zapco OEM 2/4 Channel Signal Level Converter

ASP-OE2 - Zapco OEM 2/4 Channel Signal Level Converter

    Features:

  • 6-Channel in/6-Chanel out line driver at 9.5Volrs RMS, 14Volts peak | Distribution preamp configurable for 2, 4, or 6 channels of input
  • 2-Channels input / 4-Channels output | Balanced/unbalanced inputs | Remote power supply
  • Selectable ground reference | Remote for channels 5/6 | Illuminated logo/cover plate
  • THD: 0.01% | S/N: 110dB Stereo Separation: 90dB | Preamp Output: 9.5V / 14V Peak
  • Dimensions (mm) L/W/H: 102 x 119x x39 | Mounting Dim. With Feet/Term.: 127 x 119 x 39

Zapco ST-2B 2 Channels Class Ab Amplifier, Black

Zapco ST-2B 2 Channels Class Ab Amplifier, Black

    Features:

  • 2-Channel, Class-AB Full Range Amplidier
  • Stable into 4 ohms bridged or 2 ohms stereo load
  • RCA and OEM speaker level input
  • Variable FULL / LP / HP Electronic Crossover, Inputs Gain Control and Bass Boost
  • MOSFET power supply,

Zapco DSP-Z8 IV II 8-Channel Digital Sound Processor with Digital Streaming

Zapco DSP-Z8 IV II 8-Channel Digital Sound Processor with Digital Streaming

    Features:

  • Specifications: DSP Processor: Cirrus Logic CS47048, Power: 150 MHz/32 bit/48 KHz, 8-Channels, ADC: Cirrus Logic CS5368 24 bit/192 KHz, ADC Dynamic Range/THD: 114 dB/-105 dB, DAC: Cirrus Logic CS47048 32 bit/192 KHz, DAC Dynamic Range/THD: 108 dB/-98 dB, Low level (Pre)/Sensitivity: 8/1-5 VRMS, High Level (Spk In)/Sens.: 6/2-20 V, AUX Inputs/Sensitivity: 1/0.2-4 VRMS, Optical IN: 24 bit-192 KHz, Output Ch. RCA/Sensitivity: 8 / 4 VRMS, Freq. Response (-3dB): 10 Hz – 22.5 KHz, S/N Ratio Digital In

Zapco ST-1000XMII 1000 watt Mono Class D Amplifier

Zapco ST-1000XMII 1000 watt Mono Class D Amplifier

    Features:

  • Zapco ST-1000XM II Monoblock 1000W RMS Class D Amplifier
  • Power Handling: Power @ 1Ω: 1 x 1000 watts | Power @ 2Ω: 1 x 700 watts | Power @ 4Ω: 1 x 500 watts | Max RMS Power: 1000
  • Strappable to use a pair of amps on a single voice coil | Variable input gain control | Variable electronic crossover | Variable subsonic filter | Variable bass boost control | Variable center frequency for bass boost
  • Dash mount remote amplifier gain control | THD + Noise: 0.5% | Signal to Noise Ratio: 70dB
  • Efficiency: 85% | Frequency Response: 10Hz to 200Hz ±1dB | Input Sensitivity .25v to 5v | Dimensions in Inches: 6.12(W) x 1.85(H) x 11.3(L)

Zapco ADSP-Z8 IV-8 8-Channel Digital Sound Processor with 8-Channel Amplifier

Zapco ADSP-Z8 IV-8 8-Channel Digital Sound Processor with 8-Channel Amplifier

    Features:

  • Specifications: DSP Processor: Cirrus Logic CS47048, Power: 150 MHz/32 bit/48 KHz, 8-Channels, ADC: Cirrus Logic CS5368 24 bit/192 KHz, ADC Dynamic Range/THD: 114 dB/-105 dB, DAC: Cirrus Logic CS47048 32 bit/192 KHz, DAC Dynamic Range/THD: 108 dB/-98 dB, Low level (Pre)/Sensitivity: 8/1-5 VRMS, High Level (Spk In)/Sens.: 6/2-20 V, AUX Inputs/Sensitivity: 1/0.2-4 VRMS, Optical IN: 24 bit-192 KHz, Output Ch. RCA/Sensitivity: 8 / 4 VRMS
  • Freq. Response (-3dB): 10 Hz – 22.5 KHz, S/N Ratio Digital Input: 110 dBA, S/N Ratio Analog Input: 106 dBA, THD+N Digital Input: 0,002 %, THD+N Analog Input: 0,005 %, Crosstalk at 1 Khz: 90 dB, F/R EQ: 1-6 ch Gr. & Par./31 poles, Effect EQ: 7-8 ch Gr. & Par./11 poles, Mute/Solo: Yes, each channel, Time Align. (Range/Steps): 0/15 ms / 0.02 ms, Max Delay (Cm/Steps): 515 cm / 0.68 cm, Polarity: 0/180°, Display (included): 1” LCD
  • Display (optional): 3” LCD Touch-Screen, Bluetooth Streaming, PC/Dash Board Connection: USB/6-Pin Mini DIN, Unit Dimensions: 210(L) x 125(W) x 48(H), Dash Board Dim.: 111(L) x 49(W) x 16(H), Amp Power @ 4 Ω: 8 x 80 watts, Amp Power @ 2 Ω: 8 x 120 watts, and Amp Power @ 4 Ω Bridged: 4 x 240 watts.

As an Amazon Associate I earn from qualifying purchases.

Random products:

jqa
jpojpo