Tilta Nucleus-Nano Wireless Lens/Focus Control System WLC-T04 to Wirelessly Control The Focus of Most DSLR, Mirrorless Or Cine-Style Lenses On Cage, Gimbal Such As Ronin S

Tilta Nucleus-Nano Wireless Lens/Focus Control System WLC-T04 to Wirelessly Control The Focus of Most DSLR, Mirrorless Or Cine-Style Lenses On Cage, Gimbal Such As Ronin S

    Features:

  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.
  • The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately).Please note battery for the motor is not included. And battery for the wheel is included.
  • The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet!
  • The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm
  • The Nano Motor is also able to connect to the Nucleus-M’s FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit.

TILTA WLC-T04 Nucleus-Nano Wireless Focus Control System Nucleus N Suitable for Zhiyun Crane,Ronin s and G2X Gimbal

TILTA WLC-T04 Nucleus-Nano Wireless Focus Control System Nucleus N Suitable for Zhiyun Crane,Ronin s and G2X Gimbal

    Features:

  • Wireless Lens Focus Control Motor; Wireless Hand Wheel Focus Controller; Up to 300′ Range; 5 to 18V, 0.65 to 1Nm Torque Motor; 0.8 MOD Standard Cine Gear, Gear Rings;Control Run/Stop, A-B Limits Rosewood-Lined Hand Wheel; Multiple Mounting Options Included; Includes Hardware, Batteries, USB Cable;
  • Use the Nucleus-Nano Wireless Focus Control System from Tilta to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus hand wheel. The units can connect to each other from 300′ away, and can be mounted in a variety of ways.
  • The large Hand Wheel responds with no delay as it wirelessly controls the separately available Nucleus-Nano motor from up to 300′ away via 2.4 GHz Wi-Fi, You can also perform run/stop functions and set hard A and B limits with the buttons on the wheel for more control over your camera and lens.
  • Included in the kit with the hand wheel and motor are a mounting baseplate for 95mm lenses, a 15mm rod, a micro-USB motor cable, a 0.8 MOD motor gear, two lens gear rings, attachment plates for the Ronin-S/G2 and Zhiyun Crane, mounting screws, and two Allen keys.
  • Pair this Nucleus-Nano Wireless Focus Hand Wheel Controller from Tilta with the Nucleus-Nano Motor to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.

Tilta 18650 Power Supply Box WLC-T04-BP-18650 with USB 5V and DC 8V Power Output for BMPCC 4K Camera Cage Follow Focus Motor

Tilta 18650 Power Supply Box WLC-T04-BP-18650 with USB 5V and DC 8V Power Output for BMPCC 4K Camera Cage Follow Focus Motor

    Features:

  • This dual battery pack allows you to use two 18650 batteries to power your Nucleus Nano motor via the 8V DC power output (a DC to Micro USB cable is included) or through the 5V USB port (cable not included).
  • You can also power other accessories from these ports given they are within the correct voltage range.
  • A small blue LED next to the 5V USB port indicates that the power is active.
  • A built-in 1/4″-20 mounting screw and two 1/4″-20 mounting holes allow you to mount the battery pack to your camera rig in a variety of ways.
  • NOTE: 18650 batteries are NOT included

Tilta WLC-T04-BP-18650 Power Supply Box with USB 5V and DC 8V Power Output for BMPCC 4K Camera Cage Follow Focus Moto

Tilta WLC-T04-BP-18650 Power Supply Box with USB 5V and DC 8V Power Output for BMPCC 4K Camera Cage Follow Focus Moto

    Features:

  • A built-in 1/4″-20 mounting screw and two 1/4″-20 mounting holes allow you to mount the battery pack to your camera rig in a variety of ways.
  • A small blue LED next to the 5V USB port indicates that the power is active.
  • You can also power other accessories from these ports given they are within the correct voltage range.
  • This dual battery pack allows you to use two 18650 batteries to power your Nucleus Nano motor via the 8V DC power output (a DC to Micro USB cable is included) or through the 5V USB port (cable not included).
  • NOTE: 18650 batteries are NOT included

TILTA WLC-T04 Nucleus Nano Wireless Follow Focus Control System Nucleus N Suitable for Zhiyun Crane Ronin s and G2X Gimbal

TILTA WLC-T04 Nucleus Nano Wireless Follow Focus Control System Nucleus N Suitable for Zhiyun Crane Ronin s and G2X Gimbal

    Features:

  • Wireless Lens Focus Control Motor; Wireless Hand Wheel Focus Controller; Up to 300′ Range; 5 to 18V, 0.65 to 1Nm Torque Motor; 0.8 MOD Standard Cine Gear, Gear Rings;Control Run/Stop, A-B Limits Rosewood-Lined Hand Wheel; Multiple Mounting Options Included; Includes Hardware, Batteries, USB Cable;
  • Use the Nucleus-Nano Wireless Focus Control System from Tilta to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus hand wheel. The units can connect to each other from 300′ away, and can be mounted in a variety of ways.
  • The large Hand Wheel responds with no delay as it wirelessly controls the separately available Nucleus-Nano motor from up to 300′ away via 2.4 GHz Wi-Fi, You can also perform run/stop functions and set hard A and B limits with the buttons on the wheel for more control over your camera and lens.
  • Included in the kit with the hand wheel and motor are a mounting baseplate for 95mm lenses, a 15mm rod, a micro-USB motor cable, a 0.8 MOD motor gear, two lens gear rings, attachment plates for the Ronin-S/G2 and Zhiyun Crane, mounting screws, and two Allen keys.
  • Pair this Nucleus-Nano Wireless Focus Hand Wheel Controller from Tilta with the Nucleus-Nano Motor to wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses.

Tilta Nucleus-Nano WLC-T04 Wireless Lens Control System Focus Control System to Wirelessly Control The Focus of Most DSLR (w/P-Tap Cable)

Tilta Nucleus-Nano WLC-T04 Wireless Lens Control System Focus Control System to Wirelessly Control The Focus of Most DSLR (w/P-Tap Cable)

    Features:

  • Includes a P-tap to Micro USB cable for the Nucleus-Nano which allows you to power the motor from a P-tap power output port. The 14.8V output that P-tap ports provide give the motor a much higher torque than if powered through a 5V USB power cable.
  • The Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, and modified “cine-style” vintage photo lenses. The Nano is fully cross-compatible with the Nucleus-M controllers and motors.
  • The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time.
  • When used in conjunction with the Tiltamax Gravity G2X Compact Handheld Gimbal, simple single-handed operation is possible by mounting the controller unit to the gimbal body’s rosette connection. Easily toggle between the G2X’s modes and pull focus at the same time!
  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.

TILTA WLC-T04 Focus Nucleus Wireless N Lens Ronin System Follow Nano Control

TILTA WLC-T04 Focus Nucleus Wireless N Lens Ronin System Follow Nano Control

    Features:

  • The Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, and modified “cine-style” vintage photo lenses.
  • The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time.
  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.
  • The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately).
  • Compatible with most DSLR, Mirrorless, or Cine-style Lenses

Tiltaing Side Focus Handle TA-SFH3-97-G Type III (F970 Battery) Compatible with Sony a7/a9, Canon 5D for Tilta Cage with RS-WLC-T04-SYA Nucleus-Nano Run/Stop Cable for Sony a6/a7/a9

Tiltaing Side Focus Handle TA-SFH3-97-G Type III (F970 Battery) Compatible with Sony a7/a9, Canon 5D for Tilta Cage with RS-WLC-T04-SYA Nucleus-Nano Run/Stop Cable for Sony a6/a7/a9

    Features:

  • This side handle attaches to the Tiltaing camera cages for Sony a7/a9, Canon 5D. A battery port on the bottom of the handle allows you to use a Sony F970 battery to power the Nucleus Nano motor via the 8V Micro-USB power output. A 12V DC output is also integrated into the handle.
  • A built-in finger wheel allows you to control the Nucleus Nano motor through a wired connection and a run/stop button allows you to control the record start/stop function of your camera through an optional Nucleus-Nano R/S cable (for cameras that support this function).
  • The handle also has an integrated Samsung T5 SSD card holder.Please Notice:the handle do not include the battery and T5 SSD card
  • ★●★Note: ★●★12V Micro DC Power Cable not included ★●★Note★●★The handle communicates with the Nano motor through a wired connection and does not function wirelessly
  • This cable for the Nucleus-Nano motor give you run/stop capabilities for Sony a6/a7/a9 camera systems.

TILTA RS-WLC-T04-SYA Nucleus-Nano Run/Stop Cable for Sony a6/a7/a9

TILTA RS-WLC-T04-SYA Nucleus-Nano Run/Stop Cable for Sony a6/a7/a9

    Features:

  • This cable for the Nucleus-Nano motor give you run/stop capabilities for Sony a6/a7/a9 camera systems.

As an Amazon Associate I earn from qualifying purchases.

Random products:

sxp defender
ctg60-3390w