HiLetgo ILI9341 2.8″ SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
- Driver element: a-Si TFT active matrix
- Resolution (dots): 240RGB*320Dots
- Viewing Direction: 6 o’clock
- Pixel arrangement: RGB vertical stripe
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
HiLetgo 3.5″ TFT LCD Display ILI9486/ILI9488 480×320 36 Pins for Arduino Mega2560
- 3.5″ TFT LCD Display ILI9486/ILI9488 480×320 Suitable for MEGA2560
- Support Arduino Mega2560 Directly inserted
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen)
HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240×320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC
- Durable hard PCB board and SD card socket, ideal for 5110 interface
- 2.4 inch TFT LCD shield without touch panel, fast to operate
- Support Serial SPI Mode, Interface 4-Wire SPI, Need 4 IOs from your MCU only
- Support a variety of microcontroller IO connection, professional and practical
- 5V compatible, use with 3.3V or 5V logic
Padarsey 7 Inch LED Backlight TFT LCD Monitor for Car Rearview Cameras, Car DVD, Serveillance Camera, STB, Satellite Receiver and Other Video Equipment
- 1) 7″ LED Backlight Color TFT LCD monitor. Works perfectly with car rearview cameras, supports Car DVD,serveillance camera, STB, satellite receiver and other video equipment.
- 2) Screen rotatable. Screen ratio 16:9/4:3 adjustable. Brightness, contrast, color adjustable.
- 3) With 2 AV input. AV1 connects to car DVD, VCR and other video equipment. AV2 to car backup camera.
- 4) Full color LED backlight display. High-resolution picture. No Audio input or output.Package Included: 1 x 7″ Car Monitor, 1 x Holder, 1x Frame, 1 x Video & Power Cable, 1 x Remote Controller, 1 x User Manual.
- 5) Note: You are kindly suggested to ask a professional person or go to 4S car store for installing after buying if you do not know how to install.
WayinTop ILI9341 2.8″ SPI TFT LCD Display Touch Panel 240X320 with SD Card Socket 5V/3.3V + Touch Pens + 20cm 20Pin Male Female Jumper Wires Set + 10K Ohm Resistor for Arduino/ESP32/ESP8266/STM32
- 【Touch Panel with Touch Pen】320X240 HD resolution, can be used as a touch screen. With display touch pen, with which you can operate on the screen more conveniently.
- 【Jumper Wire Set】This Kit contains with 3 x 20cm 20Pin male-male, male-female, female-female jumper wires set, it is convenient for you to do experiments and electronic project on the breadboard.
- 【10KΩ Resistor】No need to buy the resistor extra, this kit also includs 10 x 10KΩ resistor. In order that the display can work normally, these 10K resistors are required when connecting the display to the for arduino board.
- 【Widely Application】The TFT LCD Display Touch Panel Module is compatible with for arduino, esp32, esp8266 and STM32 development boards, which is very suitable for making electronic display projects.
Kuman 3.5 inch TFT Touch Screen with SD Card Socket Compatible for Arduino Mega2560 Board SC3A-1
- 3.5 inch lcd touch screen with a touch pen for Arduino.
- Compatible with Arduino Mega2560 development board directly, no any wiring needed.(SD card with 2560 is not supported)
- 3.5 inch screen is designed for arduino board modules, 320*480 resolution, better display. No external power supply needed
- we offer tutorial for beginners who would like to make projects via amazon.
- kuman 3.5 inch touch screen with good customer service.
HiLetgo 2.4″ ILI9341 240X320 TFT LCD Display with Touch Panel LCD for Arduino UNO MEGA2560
- 2.4″ diagonal LCD TFT Touch Panel display
- Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
- Colorful, 18-bit 262,000 different shades
- 4-wire resistive touchscreen
- 8 bit digital interface, plus 4 control lines
DSD TECH 1.8 Inch TFT LCD Display Module with SPI Interface for Arduino and MCU
- This is a 1.8 inch color screen that can display fullcolors, suitable for electronic enthusiasts and students to use in development boards such as arduino and raspberry pi.
- The TFT LCD display can be directly inserted into arduino, which is convenient and quick. Using SPI communication mode, only 4 IOs are needed to illuminate the display, and the SD card slot is convenient for function expansion.
- Support 16BIT RGB 65K color display, 128X160 resolution, ST7735s driver chip, working voltage is 5V/3.3V, weight is 15g
- DSD TECH provides sample code for the Arduino for this TFT LCD. With the sample code, you can use this LCD screen in 10 minutes.
- DSD TECH offer a one-year warranty and lifetime technical support for this Module. If you have any questions, please feel free to contact us! We will respond to you within 24 hours.
BW 3.5 Inch TFT LCD Monitor for Car / Automobile
- Brand New and High quality. Portable 3.5
- Wide view angle, low illumination. D/N models with photo-sensor. Distance reference marking display. Easy installation.
- Screen Size: 3.5 inch. Ratio: 4:3 TFT screen. Power Supply: DC 12V.
- Visible Area: 72mm x 53mm. Power Consumption: 2W. Operating Temperature: 0°C ~ +80°C. Storage Temperature: -10°C ~ +80°C.
- Video: 2-channel video input. Dimensions: 93 x 80 x 20mm (LxWxH).
DEVMO LCD Display Module, 2.4″ ILI9341 240X320 TFT LCD Display with Touch Panel LCD Compatible with Ar-duino UNO MEGA2560
- ★2.4″ diagonal LCD TFT Touch Panel display
- ★Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
- ★Colorful, 18-bit 262,000 different shades
- ★4-wire resistive touchscreen
- ★8 bit digital interface, plus 4 control lines
As an Amazon Associate I earn from qualifying purchases.