SMD Distortion Detector & Crossover Calibrator Combo Pack

SMD Distortion Detector & Crossover Calibrator Combo Pack

    Features:

  • The Distortion Detector’s circuitry is 100% analog, Distortion Detection trigger level > 1.0% Harmonic Distortion, Guaranteed operating range of input signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
  • Signal Present LED trigger voltage 750mVrms, Low Battery LED trigger battery voltage < 5.6Vdc, Auto-shut off timer 8 - 10 minutes after ON button is pressed
  • The Crossover Calibrator’s circuitry is digital microprocessor controlled, Crossover -3dB point accuracy +/- 0.25dB, Low Battery LED trigger battery voltage < 6.5Vdc, Auto-shut off timer 8 - 10 minutes after ON button is pressed
  • The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed or malfunctioning audio equipment.
  • If you are in installer, Own a shop, Or a DIY car audio person and don’t own these tools you are missing out on high end tuning capability. Not only can you tune the amps correctly but you can tune it in a way that lets you get the most out of your amps without damaging the amps and or your subs! SMD tools are a must have in our shop thats for sure!

SMD VM-1 Analog LED DC Volt Meter (12v)

SMD VM-1 Analog LED DC Volt Meter (12v)

    Features:

  • Input Range: 6v-30v
  • Voltage Reading Range: 10.1v – 15.8v
  • Accuracy: +/- 0.15v (due to the nature of a bar graph)
  • 100% Analog circuitry allows for near instantaneous voltage accuracy versus a traditional digital voltage meter
  • Response time from one end of range to the other is less than 200 milliseconds.

Steve Meade SMD OM-1 Car Audio Output Meter with 8v-22v Input Range

Steve Meade SMD OM-1 Car Audio Output Meter with 8v-22v Input Range

    Features:

  • Authorized Dealer
  • Brand New In Box
  • Ships Same Day If Ordered By 3PM

SMD 1 Channel Speaker Terminal (Grade 8)

SMD 1 Channel Speaker Terminal (Grade 8)

    Features:

  • 3/4″ HDPE Material.
  • CUT OUT DIAMETER – 2.75″
  • All Grade 8 Hardware
  • 5/16″ Bolt Terminal
  • FLANGE DIAMETER – 3.75″

LEIGESAUDIO 0/2/4 Gauge in 4/8 Gauge AWG Out Amp Power Distribution Block for Car Audio Splitter-2 Way(2 Pack)

LEIGESAUDIO 0/2/4 Gauge in 4/8 Gauge AWG Out Amp Power Distribution Block for Car Audio Splitter-2 Way(2 Pack)

    Features:

  • Distribution Block-High Performance 2 Way Copper Car Audio Power/Ground Distribution Block
  • 1-0/2/4 Gauge In,2-4/8 Gauge AWG Out
  • Solid Brass,Gold-Plated for Corrosion Resistance
  • The Cover Is Made Of High Strength, Nonperishable Industrial-grade Plastic
  • Applicable to auto, boat or other vehicles, protect your audio system.

SMD 2 Channel Speaker Terminal (Stainless)

SMD 2 Channel Speaker Terminal (Stainless)

    Features:

  • 3/4″ PVC Material.
  • 1/2″ Body, 1/4″ Flange
  • All Stainless Steel Hardware (28 pieces)
  • 5/16″ Bolt Terminal

Massive Audio Blade BP Series – Car Audio Monoblock Amplifier. Full Range Monoblock Car Amplifier with Bass Boost. (BP2000.1V2-1,000 Watt – Mono)

Massive Audio Blade BP Series - Car Audio Monoblock Amplifier. Full Range Monoblock Car Amplifier with Bass Boost. (BP2000.1V2-1,000 Watt - Mono)

    Features:

  • HIGH POWER CAR AUDIO AMPLIFIER: These high quality amplifiers are extremely powerful! This 12 volt car audio amplifier features: 900W @ 2 Ohm / 2000W x 1 Peak Output Power @ 14.4V, Freq. Response 15Hz~250Hz, Built-In OEM Line Converter, Bass Boost 0~6dB/12dB @ 45Hz. Our monoblock amplifiers for cars, boats and off road vehicles provide rich clean power for your subwoofers!
  • PRODUCES POWERFUL, CLEAN, FULL SOUND: Our amplifiers are very efficient and powerful and provide you with a real value that you can hear for yourself. Our mono car subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 9 Volts directly in.
  • QUALITY TESTED AND GUARANTEED TO GO BEYOND RATED POWER: Hits its full power or more all the time! That is our guarantee! You don’t need to set the gain to low to avoid distortion. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry.
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER: Don’t settle for underpowered and underwhelming car stereo monoblock amplifiers that sound weak, not efficient, distorts at high power and terminals that get shorted! With our extra features like Built-in Noise Reduction Circuitry, Auto Sensing Turn On Function, 12V Remote Output for External Devices (Hi-Level Inputs), and Mil Spec PCB with SMD Parts ensure you get what you are looking for!
  • MASSIVE AUDIO QUALITY GUARANTEED. Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.

SMD 4 Channel Speaker Terminal (Stainless)

SMD 4 Channel Speaker Terminal (Stainless)

    Features:

  • 3/4″ PVC Material.
  • 1/2″ Body, 1/4″ Flange
  • All Stainless Steel Hardware (56 pieces)
  • 5/16″ Bolt Terminal

As an Amazon Associate I earn from qualifying purchases.

Random products:

lkwrb1418ss
gdrtwwh