CrocSee RTD Pt100 Temperature Sensor Probe 3 Wires 2M Cable Thermocouple -58~572°F (-50-300°C) 1/2″ NPT Thread
- Type:RTD Pt100; Tolerance Class: Class A;
- Measuring range:-50~300 ℃ (-58~572℉)
- Cable Total length:2 meters(6.5ft, include the probe)
- Probe length:50mm, Probe diameter:6mm, Thread :1/2″ NPT
- Probe material:Stainless Steel 304; Terminal:3 insulated forks
T-PRO RTD PT100 Temperature Sensors Three-wire System，Stainless Steel Probe(4×30MM) Range:-50℃-200℃ (6.6Feet)
- waterproof design
- grease proofing
- precision measurement
Waterproof RTD PT100 Temperature Sensor – Jaybva Stainless Steel 3 Wire Thermistor Probe for PID Temperature Controller NPT 1/4″ Inch Pipe Thread with Insulation Lead Shield Wire -50~500℃ with 2m Wire
- This RTD temperature probe sensor is waterproof . Thread NPT 1/4″
- Cable: 78.7 inch ( 2m ) metal braided line . The wire is made of shielded glass fiber wire ,thr wire can withstand 600℃ high temperature . It is compesation wire with shield feature . Much better than Teflon .
- The high quality material Platinum is rustproof .
- High accuracy IC : A grade accuracy .
- This Pt100 sensor 2 Meter compensation shield wire .
10Pcs PT100 Platinum Resister Temperature Sensor Waterproof Probe﹣20℃ to 250℃
- PT100 platinum resister temperature sensor probe, stable performance
- Wide temperature range from﹣20℃ to 250℃, high temperature measuring accuracy
- External insulated shielding and internal fiberglass insulation, safe for use
- Waterproof probe, longer service life
- Small dimension, short thermal response time, quick and convenient
Stanbroil RTD Temperature Probe Sensor Replacement for Traeger Digital Thermostat
- Compatible with all Traeger Wood Pellet Grills (EXCEPT PTG).
- Material: 304 stainless steel probe, high class plastic wire.
- 7″ Internal Grill Sensor, , maintains more consistent temperatures.
- RTD probe for Digital Thermostat, measure pellet grill inner temperature.
- Install: spliced to thermostat leads, no tool needed, It also can be used for either BBQ or food. Package includes probe and screws.
RTD Temperature Probe Sensor Meat Barbecue with Mother Shell, Replacement for Pit Boss P7 Series Wood Pellet Grills PB-39P400
- > Compatible with Pit Boss P7 Series. Note: Please check spade connector style before ordering. Waterproof and healthy material, that gave you the ability to keep an eye on the internal temperature of both a whole small food at the same.
- > Strict quality control standards to Build and test. Not OEM but quality exceeds OEM requirements. Easily spliced to thermostat leads, no tool needed. Perfect match and Good Choice for Direct replacement of original parts, this Probe Sensor works great on our smoker and we were able to get our food smoked for festival.
- > 3/16″ (3cm) Internal Grill Sensor, 14″ (35cm) Stainless Steel Wire Lead, c/w SM female connectors, Screw and nut are not included, extra thin probe tip leaves a smaller puncture hole when sampling. The tip of the probe tube can be run under a faucet or cleaned with a damp rag.
- > It can be used for either BBQ or food; To monitor the meat temperature or ambient temperature (smoker/grill), This probe works very well on smokers that have electronic controls.
- > Guarantee and Service: The probe sensor Replacement Part completed with a One-year Warranty. Save much money off dealer prices. If the probe once failed on your pellet grills and smokers, simply contact us for a replacement or refund.
RTD Temperature Sensor for Traeger Grills by Ortech
- 4″ Stainless Steel Temperature Probe
- 48″ Lead Wires
- Platinum, Class B, 1000 Ohm Element
- Kit Includes: RTD, Screw with Nut, Cable Tie, and User’s Guide
- 0 to 700 Degrees Fahrenheit Temperature Range
T-PRO Bonded RTD PT100 Sensor 1M/3.3Ft Wire
- Temperature rang: -50~200℃
- Probe Model: Bonded
- Cable Size:Length 1000mm
- Cable Material:PFA
Podoy RTD Temperature Sensor for Camp Chef Wood Pellet Grills，7″ Digital Thermostat Replacement Parts Compatible with PG24-44
- ▲The Temperature Sensor Probe reads the internal temperature inside your BBQ and sends a signal back to the controller to maintain consistent grill temperatures. This unit works with Camp Chef Pellet Grills.
- ▲Design improved for more durability, Stable and updated characteristics, high reliability. For use with all meats, great replacement probe and/or additional probe.
- ▲The probe can be used for either BBQ or food. Monitor the meat temperature or ambient temperature (smoker/grill).
- ▲The tip of the probe tube can be run under a tap or cleaned with a damp rag.Plug and Play Simple Installation.
- ▲If you have questions, please feel free to contact us, we will deal with it as soon as possible. for any reason you’re not completely satisfied, you can ask for a replacement or full refund.
RTD Temperature Probe Sensor for Traeger Digital Thermostat, Grill Oven Probe Replacement Part Compatible with Traeger Wood Pellet Grills
- ☆【Compatibility】： 7″ Internal grill RTD probe sensor for digital thermostat, compatible with all Traeger grill models except the PTG.
- ☆【Function】: Maintains more consistent temperatures. Measure pellet grill inner temperature.
- ☆【Easy to Install】: Spliced to thermostat leads, no tool needed, easy to install & durable to use.
- ☆【Package Included】: Package includes probe and screws.
- ☆【Satisfied Guarantee】- We provide lifetime money back guarantee, for any reason you’re not completely satisfied, you can ask for a replacement or full refund.
As an Amazon Associate I earn from qualifying purchases.