ART DJ Pre II Turntable Phono Preamplifier with RIAA EQ and a RCA Male to 2 RCA Male Audio Cable 3′
- Phono Preamp for Recording and Playback
- Switchable Input Capacitance: 100pF/200pF
- Low Cut Filter Switch
- Gain Trim and Signal Gain/Clip LED
- Low Noise
DYNASTY PROAUDIO UA2D USB Phono Preamp for Turntable, Preamp with RIAA Equalized Low Noise Moving Magnet A/D Converter (Power Adaptor & USB Cable Included)
- ✅The Dynasty ProAudio UA2D has the ability to be connected with all kinds of turntables with moving magnet (MM) cart- ridge or line level audio devices (tape recorders etc. ), easily transfer and convert from your favor albums vinyl records to your computer or laptop into a digital format file for organization.
- ✅High performance USB audio interface Integrated, built-in with a premium circuit technology and components phono preamp that allow you to amplify an RIAA equalized low noise Phono and Line level audio signals. Simply connect it to your desktop and laptop computer’s USB port for recording with true-to-original sound and no quality loss.
- ✅The Dynasty ProAudio comes with USB audio driver technology that ensures latency free operation to a new level, which supports 48/44. 1 KHz sampling rate for both monitoring and recording.
- ✅Can be used as a Phono preamp for any vinyl playback system, amplifies the signal from your turntable to levels that allow you to connect it to your sound system.
Nobsound Little Bear T11 6N2/12AX7 Vacuum&Valve Tube Phono Turntable Preamplifier; MM RIAA LP Vinyl Record Player Preamp; Stereo HiFi Audio Pre-Amplifier
- Little Bear T11 is a pure tube phono preamplifier working with MM cartridge turntables only. Please make sure your turntable is equipped with a PHONO signal output instead of a LINE output.
- Little Bear T11 is based on T10 with improvement. Compared to T10, T11 has lower background noise at normal volume. Its sound performance is better with increased liveness.
- Adopting a conventional active RIAA equalization phono stage circuit. There is 3 metal covers and 4 acrylic covers for those tubes. And you will be able to choose which type as you like.
- Supporting 6N2/12AX7 tubes, which offers many replaceable tubes for you like 6H2,6H2n (For 6N2 type) and 12AX7B,6N4(9PIN),ECC83,5751 (For 12AX7 type).
- On the bottom of the description, there is a few Q&A for buyers who might meet the humming problem. If you encounter a similar issue, please check those tips, which have covered most of conditions.
Phono Turntable Preamp, SUCA-AUDIO Mini Phono Preamp Hi-Fi RIAA MM Turntable Pre Amp Low Noise with RCA Input & Output – Compatible with LP Vinyl Recorder Players
- 【Converts Phono Signals】This MM PHONO Stage Preamp can convert phono signals to line level signals. Provide high fidelity and warm sound beyond your expectation, compatible with all line-input (AUX etc) of your amplifier, receiver, or powered speakers.
- 【 Low Noise Operation】Adopt with accurate stable integrated circuit and high quality components to remove low frequency noise ensure clear sound quality, definitely work good for your phono turntable or any vinyl recorders.
- 【Easy to Use】Easy quick setup for all MM (moving magnetic) cartridges, NOT for MC cartridges. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs and connect with your passive speakers.
- 【High Quality】Fashionable appearance with heavy aluminum case with good heat dissipation. Compact size allows it use near your turntable. Come include a 12V/2A power adapter.
- 【Quality Service】LYCHEE LIMITED provides 12 month warrantys, please contact us first if you have any problems. No risk return or refund.
Electronics-Salon A-300 Stereo Phono RIAA Preamplifier Preamp Module (For MM Pickup)
- Best Operating Voltage: +/-9V DC to +/-15V DC.
- Gain: 40dB
- RIAA Accuracy: <1dB.
- Bandwidth: 20 to 100KHz (-3dB).
- Distortion: 0.05% (@1KHz).
As an Amazon Associate I earn from qualifying purchases.